Install
      Back to home
      1. Databeat Knowledge base
      2. Samsung
      3. Install

      How to install OMNIplay on Samsung Tizen 2.4, Tizen 3.0 and Tizen 4.0 (SSSP4-6)

      In this article you will learn how to install and configure the OMNIplay app on a Samsung Tizen public display with SSP4-6 for use with DatabeatOMNI.

      samsung signage

      Related articles

      Tip: Verify that you have a Samsung public display that is running Tizen 7.0
      Which Smart Signage Platform (SSP) version does my Samsung public display model have?

      If you are on a private or Norwegian server, please refer to this article on how to configure your license key to the private server.

      Table of contents

      Step 1: Before you begin

      Requirements

      Please ensure you have the correct and necessary requirements before you begin.

      1. Samsung Tizen (SSP4-6) public display.
      2. Samsung remote with charged batteries. Read more. 
      3. Power cable and socket available.
      4. Internet via cable or Wi-Fi credentials. Read more
      5. OMNIplay license key. Read more

      Transport, unpacking, and mounting

      1. Inspect. First, check for damage to the packaging. Take a picture of the packaging before unpacking if you suspect any damage.
      2. Unpack. Carefully unpack the public display and check it for any physical damage. Take pictures of the screen and report damages immediately.
      3. Mount. The screen must be mounted properly for the ventilation to work. The warranty may be broken and invalid if mounted incorrectly. Rotate the screen clockwise to show content in portrait.

      Please contact your reseller or administrator if you have any issues. 

          Step 2: Install OMNIplay

          First Time Use (Brand new with factory reset settings) or Samsung Menu. 

          Samsung Menu. If the device has been configured already, or used previously, you will not be prompted with device settings.

          Installation can be done directly from the Samsung Menu. 

          First Time Use. Starting up the device for the first time you will be prompted with the default language and country selection. However, if you are not prompted with this, the device may have been used previously and we recommend doing a factory reset to avoid any issues.

          Learn how to factory reset your Samsung public display.

          1. Select English in Menu Language.

          2. Select Basic Setup in Installation type.

          3. Select Landscape or Portrait in Display Orientation.

          4. Select Off (Recommended) in Auto Power Off.

          5. Select desired Network connection in Network Settings.

          6. Select URL Launcher and insert https://www.databeatomni.net/tizen

          "Custom app" instead of URL Launcher: Go to the Samsung SSP10 installation guide.

          Warning! All letters in the url has to be lower case. Common issue is that the first "H" in "https" is automatically set to be capital letter. This has to be manually set to be lower case with the digital keyboard prompted on-screen. 

          7. Select Next with right arrow on the remote.

          8. Select Skip in Connect to RM Server.

          9. Set the Date & Time in Clock Set.

          10. Your Samsung SMART Signage is now ready to use. 

          11. Samsung Toolbar will prompt. Select URL Launcher to start OMNIplay. 

          12. Add the license key when the app is installed. (Example: NOABCD0001A)

          Explore further information on OMNIplay Setup by clicking on the provided link.

          Step 3: Configuration

          • Deactivate Eco Solution: [Menu - System - Eco Solution - Eco Sensor=Off]
          • Activate AutoPowerON: [Menu - System - Power Options - AutoPowerOn=On]
          • Activate Network Standby: [Menu - System - Power Options - Network Standby=On]

          The Samsung public display is successfully configured with OMNIplay, congrats!

          Troubleshooting

          If you have any issues, want to learn more, or need custom settings on the device you will find some useful information below. Contact Databeat Support if you need further assistance.

          The downloading process of OMNIplay does not start automatically. 

          • Start manually with Home - URL Launcher

          Unable to connect to the server? 

          • Verify correct information from step 1, step 2 and step 3. 

          The display has been used previously. 

          Turning off due to service hours? 

          • Check Time & date settings, time zone and service hours in DatabeatOMNI.

          Turning off due to inactivity (default 4 hours)? 

          • Set Auto Power Off to Off in Power Control.

          No valid content in selected channel? 

          1. Press CH on the remote and select a channel with active content.
          2. Press 3 to check the mediaplan and see if the content is available/downloading.
          3. Log into your DatabeatOMNI account to manage your new OMNIplayer.
          4. Verify firmware and mediafile compatilibily for your device. 
          5. Contact your Reseller or Databeat Support.