Install Databeat Doorsign on Philips 10'' Multi-Touch Display

This article explains how you can install Databeat Doorsign on Philips Multi-Touch Display (10BDL3051T). Create and display digital doorsign information from your Office 365 or Exchange calendar.

DBdoorsign_Philips

This is what you need

People, Room, Resources

  • Philips 10'' Multi-Touch Display (10BDL3051T)
  • A Network Connection (WiFi or Ethernet)
  • A DatabeatOMNI account and a license key

Tip: Philips 10'' supports Power over Ethernet (PoE)

Overview

  1. Setup Philips display
  2. Install Databeat OMNIplay app
    1. Install Databeat OMNIplay app from the web browser
    2. Install Databeat OMNIplay app from USB
  3. Add license key for Doorsign
  4. Adjust & Verify settings

Setup Philips display

  • Power on the display. The power button is on the back of the display.
  • Select Language in Welcome Menu and select Start
  • Select Wi-Fi or Ethernet to connect to a network and select Next

If Wi-Fi, enter password and select Connect

If Ethernet, select DHCP if unspecified and select Next

  • Select Skip
  • Select Skip
  • Select Finish

Install Databeat OMNIplay app

Philip 10''

  • Click the buttons as shown on the picture above.
  • Standard Password (10BDL3051T): 1234
  • Enter the password and select OK

Install Databeat OMNIplay app from web browser

  • Select Apps
  • Select Chromium
  • Select Accept & Continue in the dialogue box
  • Enter: https://www.databeatomni.net/android

Click [12#] for symbols

OMNIplay for Android

  • Select OK when This type of file can harm your device. Do you want to keep omniplay-10.apk anyway is prompted.
  • The file will download automatically. Open the file from the pop-up menu when the download is complete.
    • Should the pop-up to open the file not prompt, follow these instructions
    • Press Enter to download to File Browser
    • Press Arrow Back on the bottom-centre of the interface
    • Select File Manager
    • Go to /Storage/sdcard0/Download in File Manager
    • Open omniplay-10.apk
    • OMNIplay will ask for download. Scroll down and select Next.
    • Select Open once the app is installed

Install Databeat OMNIplay app from USB

  • Download the latest version of OMNIplay for Philips

https://www.databeatomni.net/android

  • Save the latest version of .apk on a USB and insert in USB socket in public display
  • Android Settings
  • Select Apps menu
  • Select File Manager
  • Select File Browser - MNT - Open - USB_Storage - Open
  • Select USB_Disk1 - Open - Open OMNIplay file stored on USB
  • Select Next and Install
  • Open the installed app

Add license key for Doorsign

The application will ask for your license key the first time it launches

  • Enter License Key and press Save. Example: NOADCD0001A
    • Enter OMNIplay app to re-configure license key
    • Press twice on the round button displayed on the picture below

Philips

    • Select Settings (the gear icon) in the Service menu

Android Service Menu

  • OMNIplay will download and display the content when ready

Adjust & Verify settings

  • Set OMNIplay as standard Signage Software
    • Open settings by pressing the round button, followed by volume down

Philips 10''

    • Select Signage Display
    • Select Custom App - Select App
    • Select OMNIplay and Save
  • Set Timezone
    • Select Settings in Android Menu
    • Select Date & Time
    • Select Time Zone
  • Adjust brightness
    • Select Settings in Android Menu
    • Select Display
    • Select Brightness
  • Start application
    • Select Return
    • Select Apps
    • Select OMNIplay

Installation & Setup is now complete.